LPR Camera: How to Choose and Install One That Actually Reads Plates
SolutionsNovember 16, 2026By IncoreSoft Team

LPR Camera: How to Choose and Install One That Actually Reads Plates

Most missed plates are camera problems, not software problems. How to choose an LPR camera — lens, shutter, IR at night, mounting angle — and the installation mistakes to avoid.


When a license plate recognition project underperforms, the first suspect is usually the software. In our experience with integrators, the cause is more often the LPR camera: the wrong lens, a slow shutter, IR that burns out the plate, or a mounting angle that turns characters into slanted shapes. No recognition engine can read characters that never reached the sensor.

What makes an LPR camera different from a regular CCTV camera

A general surveillance camera is tuned to show a scene: wide view, balanced exposure, smooth motion. An LPR camera, or an ANPR camera as it is called in the UK and Europe, is tuned for one small object: the plate. That changes the priorities:

  • Narrow field of view. The plate must be large enough in the frame for the characters to be readable.
  • Fast shutter. Characters must stay sharp on a moving vehicle, even if the rest of the image looks dark.
  • Controlled IR. At night the plate should be readable without turning into a white rectangle.
  • Stable focus day and night. Focus that is perfect in daylight can drift when the camera switches to IR.

Some cameras ship with on-board plate reading. Others are standard IP cameras that stream video to recognition software on a server. Both approaches work; we compare them below.

How to choose an LPR camera: five checks

1. Lens and capture distance

Start from the lane, not from the catalogue. Measure the distance from the camera to the point where you want to read the plate, and the width of the lane. Then pick a focal length that gives enough pixels across the plate at that distance. A European plate needs at least 75 pixels across for the characters to show with full contrast, and most LPR software works best at 100–150 pixels. In VEZHA, the recognition area itself should be at least 200 pixels in height or width, with an aspect ratio between 0.6 and 2. For minimum resolution, our LPR Camera Install Guidelines suggest 1 MP (720p) for one lane under 4 m wide, 2 MP (1080p) for two lanes and 5 MP for three. To check a real camera, save a frame and measure the plate width in pixels in any image editor. A lens that is too wide is the most common reason for missed reads at entries and on roads.

2. Shutter speed

For moving vehicles, a fast shutter matters more than a bright image. Slow shutter settings blur characters, especially at night. Use a fixed shutter: our guidelines recommend 1/500 s for speeds up to 40 km/h and 1/1000 s up to 80 km/h, and shorter still when the camera looks at the lane from a wider angle. Then compensate with IR, not with longer exposure. Frame rate matters too: higher FPS gives the software more chances to read a fast vehicle. Our guide to camera frame rate explains the trade-off with storage and bandwidth.

3. IR illumination at night

Reflective plates bounce IR back strongly and can overexpose. Printed, older or dirty plates reflect much less and may stay dark. Test both types on site at night, with the IR power and exposure you will actually run. To stop reflective plates from burning out, limit the camera's maximum gain, and turn WDR off unless the camera's documentation says otherwise: it can add motion artifacts on moving vehicles. If you use an external IR illuminator, mount it close to the camera, because plates reflect light straight back towards its source.

4. Mounting height and angle

The steeper the vertical and horizontal angle to the plate, the more the characters are distorted. Mount the camera so it looks along the lane rather than down at it, and keep it close to the lane axis. Our guidelines recommend a mounting height of 1.5–2 m above the road, above headlight level to avoid glare, and a total angle between the camera and the direction of travel below 30°. Rotate the camera so the plate is parallel to the edges of the image, and use a structure that does not vibrate when heavy vehicles pass. For multi-lane entries, plan one camera per lane rather than one wide camera for everything.

5. Stream and integration

Check how the camera will deliver video to the recognition software. VEZHA LPR works with any ONVIF or RTSP stream and has dedicated integrations for Axis cameras via ACAP and for Hanwha cameras. Events can go to the VMS the operator already uses: Milestone XProtect, Nx Witness, Axis Camera Station Pro and others with confirmed integrations.

On-camera LPR or software on a server?

Built-in LPR on the camera is convenient for a single entry or a small car park: fewer components, simple setup. Software on a server, or analytics running on the camera through a platform such as Axis ACAP, makes more sense when:

  • you have many lanes or sites and want one database and one set of lists;
  • you need business logic beyond "open on whitelist": tags, stay intervals, notifications, reports;
  • you mix camera brands, or want to keep existing cameras;
  • you need regional plate formats handled well, for example states in Mexico or the US.

VEZHA LPR, for example, reads make, model, colour and country identifier with each plate, and now shows the detected state or region for supported countries such as the USA, Mexico and Argentina, with a Region/State filter in events and reports. For Latin America it uses OCR Model 2 in the regional configuration.

Six installation mistakes that cause missed plates

  1. Testing only in daylight. Most problems appear at night. Always sign off a camera with night footage.
  2. Focusing once. Check focus again after the camera switches to IR mode.
  3. One camera for two lanes. It saves a camera and costs you reads. Plan one per lane where you need reliable results.
  4. Leaving default image settings. Auto gain, WDR and high local contrast can overexpose the plate or add glare and noise at night. Limit maximum gain, turn WDR off and prefer a black-and-white image for recognition.
  5. Ignoring real plates. Test with the plates that actually drive through the site: dirty, damaged, dark-coloured, foreign. VEZHA now reads dark and chocolate-coloured plates reliably, but the camera still has to capture them.
  6. Opening the barrier on the plate alone at high-security sites. A plate can be copied. Where the risk is high, combine LPR with a second factor such as a card, a guard check or face recognition.

Where LPR cameras are used

The same principles apply at office and residential entries, car parks, logistics yards, toll and city roads, and in speed control with sequential cameras. For car parks, see our LPR parking system guide. For the full feature list, see VEZHA License Plate Recognition.

IncoreSoft works through a network of more than 600 partners in 42 countries. Partners get the full LPR Camera Install Guidelines and access to our presales team in the partner portal. If you are planning a project, send us a short clip from your camera and we will tell you what to change before installation.

FAQ

What is an LPR camera?

An LPR camera is a camera set up to capture readable images of vehicle license plates: narrow field of view, fast shutter and controlled IR. Recognition runs either on the camera or in software that receives its video stream.

Can I use a regular IP camera for license plate recognition?

Often yes, if it can be configured for a narrow view, a fast shutter and good night images at the capture point. VEZHA LPR accepts ONVIF and RTSP streams from standard IP cameras. Test with real plates at night before you decide.

Why does my LPR camera miss plates at night?

The usual causes are IR overexposure on reflective plates, too little IR for printed or dirty plates, a slow shutter that blurs characters, or focus that shifts in IR mode. Limit the maximum gain, set a fixed shutter and check focus in IR mode before changing the software.

What is the difference between an LPR camera and an ANPR camera?

None in practice. LPR (license plate recognition) is the common term in the US and Latin America; ANPR (automatic number plate recognition) is used in the UK and much of Europe.

News
Contact Us

Ready to Get Started?

Fill in the form and our team will get back to you shortly.